B18c1 GSR Head w/ ITR Valve cover...
|
|
Check it out...:
Some good links for all kind sof Misc. crap...
|
CRXpower
-Hell yeah.... best CRX message board around. How-tos, A CRX board and CRX technical specs... plus, the people kick ass, unlike some OTHER web boards......
http://www.crxpower.net
SuperHonda
Most likely the LARGEST Honda board on the planet... if not, pretty damn close. Has ALOT of really smart peeps, and alot of traffic. I usually raom around on here during th day, being as I mod on there.... but all in all a decent site, that is beginning to get better again....
http://www.superhonda.org
Skunk2
Skunk2 makes some of the best parts on the market for B series Honda engines for the money. Decent prices for decent power and dependabilty, you can't go wrong with Skunk2 parts...
http://www.skunk2.com
Group Buy Center
Where I get %90 of my stuff...... mad cheap too. I'd always check here first for parts, theres always some kick ass deals going on...
http://www.groupbuycenter.com
Ebay
Ya never know what you'll find here....but they'll usually have what you're looking for. Sometimes ya can get really good deals, but it's all luck. Still a good place to look for parts though..
http://www.ebay.com
|
Pure JDM Heaven
You name it, they probably have it. From engine swaps to full front end conversions, they can hook you up. It all depnds on how much $$ you have.
http://www.jdmhondaparts.com
Soko Motors
The cheapest place I have found anywhere for engine swap packages. They have a dam,n good reputation and stock almost any import motor. The only problem is they are SO popular, it's hard to get a motor in stock, you usually need to wait a month or so.....
http://www.soko.com
Nippon Motors
Where I bought my B16a package from. A little bit more money than from SOKO, but they had it in stock and ready to go. I must say, I was pleased with their service and I recommend them to anyone.
http://www.nipponmotors.com
Endyne Performance
Makes some top notch shit, as well as lots of informative stuff on misc. engine internals.
http://www.theoldone.com
Purehonda
I usually only go here when the other 2 are down. Basically, it's all the same, just with some different people, and different ranges of knowledge. PH just happens to rank on the bottom of the knowledge scale. http://www.purehonda.com
Crower
Makers of some of the best engine internals on the planet. If you're looking to go turbo, or just need a better bottom end... definitely check this shit out.http://www.crower.com
Rev-Hard Turbos
REV HARD..or don't rev at all. Seriosuly, Rev-Hard is THE way to go for an aftermarket turbo kit. FMAX and DRAG are ok...... Greddy can eat my ass. How do ya like a turbo that can handle 39psi? Not like your bottom end can... but it's good to know your turbo won't fry...http://www.revhard.com
|
|
That's it for now......
Can't realy think of what else ya would need.
|
|
